Complete CNC turning solutions built around your part—from machine configuration, tooling and workholding to programming, automation and production validation.
Part-First Engineering
Every configuration starts with your part — geometry, material, tolerance, batch size and target cycle time decide the spindle bore, guide bushing or gang tooling, turret layout, tailstock and CNC system.
Complete Turnkey Package
Machine, workholding, cutting tools, programming and process parameters are engineered and proven together to deliver accuracy, stable cycle times and repeatable production.
Single Machine to Full Line
From a single CNC machine to a complete production line, send us your drawing and production requirements. We will configure, prove out and deliver the complete solution.
Every CNC turning solution we deliver starts with the part, not the machine. Geometry, material, tolerance, batch size and target cycle time decide the configuration — spindle bore, guide bushing or gang tooling, turret layout, tailstock and CNC system.
We engineer the complete package: machine, workholding, cutting tools and process parameters proven together on your part family, so accuracy and stability are repeatable from the first shift.
From single machines to multi-machine lines, send us your drawing and we will propose the configuration, prove the cycle with a sample run and quote the complete solution.
I can provide drawings, material and blank specifications. Can you recommend the right machine and machining route?
Yes — that is exactly how we start. Send the drawing (PDF, DWG or STEP), material grade, blank dimensions, key tolerances and your target output. Our engineers review the part geometry and process, then recommend a machine model, fixture concept and machining route, together with an estimated cycle time. We reply with a written evaluation and quotation within 24 hours.
Can my part be completed in one setup? Which operations would need other equipment?
It depends on geometry, size and accuracy, so we answer this per part, not in general. After reviewing your drawing we reply in writing: which operations are completed in one clamping, which need a second operation or a different machine, and what the recommended process chain looks like. If a part genuinely needs two setups, we say so instead of promising one-setup results.
Are cutting tools, fixtures, bar feeder and CNC programs included?
They can all be included — the delivery scope is defined line by line in our quotation. A typical turnkey package covers the machine, fixtures designed for your parts, the tooling package, bar feeder integration and CAM programs for your parts, plus a recommended consumables list. If you prefer machine only, or want to keep your existing tooling, the scope is adjusted and every included and excluded item is listed before you sign.
How do you evaluate the machining time for my parts?
We build the process route first, then calculate cycle time from tool paths and cutting data, and cross-check it with CAM simulation. The estimated time per part is stated in the proposal. During trial cutting the actual cycle time is measured; the measured result — not the paper estimate — is the basis for acceptance, so the number you plan production around is a verified one.
Can you run trial cutting with my own material?
Yes, and we recommend it. You send material or blanks; after the machine, fixtures and programs are ready we machine your parts, record cutting parameters, cycle time and tool behaviour, and provide a trial report with measurement results, photos and video. The trial schedule is agreed with you in advance, so you can attend in person or follow it remotely.
HAVE A PART TO PRODUCE? LET'S BUILD THE RIGHT SOLUTION.
Send us your part drawing, material, tolerance and production requirements. Our team will evaluate the application and recommend the right machine, process and automation configuration.
SEND YOUR PART DRAWING
Share your part and production requirements. Our team will review the application and recommend the next step.
